Welcome back to sunrise’s blog

today repair man: James help you to replace the digitizer of ipad mini.

How to replace the digitizer of iPad mini？

Case: an iPad mini facedown fall from 3 meters high :O

And James, who teach himself repair phones and tablets, wanted to save it. By the way, it’s the first time for him to replace digitizer of tablets, wish everything is smooth. This is James, he is too shy and unwilling to show up, I think that's why he still single

Step 1:

Heating the sidewall of the iPad mini. Tips: The heat gun temperature should be around 200 degree.

Step 2:

Remove the damaged digitizer with opening tools. Tips: When you remove the digitizer, do not pry down, or you will ruin the LCD. There is less glue in the left side and right side. In this case, James decided to start at the right side, because left side was too damaged!

Step 3:

Remove the adhesive of LCD.

Step 4:

Spin out the screws of metal plate. Remember the correct places of the screws!

Step 5:

Unlock the battery connector, LCD connector, heat the digitizer connector then unlock it.

Step 6:

Install a new digitizer to the iPad mini. Lock the battery connector, LCD connector and digitizer connector.

Step 7:

Test the digitizer functions before installation.

Step 8:

Remove the transparent plastic film after testing.

Step 9:

Check if there is any dust.

Step 10:

Clean.

But sometimes although you do all the steps right, the digitizer doesn’t work after the installation, yeah, that’s life lol J

But the good news is you can paste the antistatic sticker to solve this problem.

Below is our products & QC dep.

We want to say: Thank you for them.

Thank you to make the best products and 3 times check the products quality.

until the best quality we sent to our clients. thank you so much :)