2014年12月30日星期二

How to use iCorner 5, 5S SideWall Tool G1204?

How to use iCorner 5, 5S SideWall Tool G1204?

Description:
The iCorner iPhone 5 & 5s SideWall Tool from gTool:trademark: is a professional repair tool that allows you to easily restore a bent or damaged side wall to its factory shape on the iPhone 5 and iPhone 5s outer casing. When the iPhone is dropped, and forceful impact bends and distorts the shape of the casing on its side walls, not only will it most likely result in screen damage, but it can also prevent you from properly fitting and installing a brand new screen replacement.

Often repair technicians will attempt to bend the casing back into shape using tools such as a hammer and metal chisel. These methods will commonly produce undesirable results and could lead to further irreparable damage to the outer casing. Luckily the gTool:trademark: iCorner SideWall Tool is here to put all the stress and difficulty out of repairing the iPhone 5 and 5s. With its specially designed and precision cut heads the iCorner SideWall Tool easily bends and restores the damaged sidewall back into its factory shape - giving you the ability to properly install a new screen.

The iCorner SideWall Tool is a must have for repair shops and technicians that see this kind of damage on a daily basis. Not only will it streamline the process of iPhone 5 and 5s repairs, but also provide the professional grade service your customers expect when trusting you with their precious device.

How to use it?
Video: http://vimeo.com/81026408
Step 1:
Locate the damaged area.
Step 2:
Whilst guiding the tool with your thumb, position the iCorner SideWall Tool head over the effected area.
Step 3:
Begin to rotate the large screw knob in a clockwise direction until the tool is attached to the device.
Step 4:
Place the device on a table top and position the iCorner SideWall Tool, then slide the G1210 Assistant over the square bridge of the iCorner.
Step 5:
Slide the G1209 Assistant over the large screw knob until locked into position.
Step 6:
With your left hand, press and hold the G1210 Assistant down.
Step 7:
With your right hand, begin to rotate the G1209 Assistant in a clockwise direction.
Step 8:
Visually inspect the damaged area whilst turning the G1209 Assistant until satisfied with the repair.
Step 9:
Loosen the large screw knob by rotating it in an anti-clockwise direction and remove the tool.

2014年12月26日星期五

How to fix charging problem of iphone 5G

A secret of iPhone repair expert: 
How to fix charging problem with just a tiny enameled wire

Have you ever in the situation that the iPhone 5g can’t charge and connect the computer when the charging flex is totally fine?
When this happen, it might be something wrong with the small charging IC.
Normally, there are two problems with the small charging IC: one is the IC burned, or the IC missing.
Replacing a small charging IC takes much time and repair cost is expensive, so some customers can’t accept that.

Today we visited a very cool iPhone repair expert, and he told us his secret: fix small charging IC problems with a tiny enameled wire.
When the iPhone 5g small charging IC was disabled or missing, you just need to connect the electric circuits of the motherboard.
The following image is one part of iPhone 5g motherboard schematic


Please check the three groups of ports in the following image:

You just need to connect these 3 groups of ports then you can fix the problems.
For example: connect A2 (or A3, or B3), B1, C2 (or B2, or C3) by enameled wire.
And it works just like small charging IC.